HOME l PRINTING l SIGNAGE l ONLINE QUOTE l FILE UPLOAD l RESOURCES l CONTACT

$29*

A1 Photo Print, (84cm x 59cm)

Wide Format print, 200gsm matt paper, and if you're comparing prices ask about the inks used.

We use eco solvent inks which will not fade in the sun like water based inks, you can use these prints in a window and still expect 2-3 years +.

You can try our amazing premium Posters printed at 1440dpi in breathtaking colour for a small amount extra.

So for stability in strong light, a mounting service on 5mm Coreflute, Kapaboard (premium mounting board), fome board, MDF and more talk to us AND we'll gloss or matt laminate, hot or cold to ensure your poster really lasts.

West Australia's colour & digital Specialists Makes a Perfect Gift for someone special

Upload your favourite picture and see it come to life at 84cm x 59cm* sized pdf must be supplied or $5 fee applies

AND what about our "pull-up" banners or cassette banners for as little as $249 plus GST for 850mm wide x 2m high including the case, printed insert, ready to go!!!!!

Wait, there's more...... if you are happy to trim the posters yourself you can have prints on the roll at 1300mm wide x 1m deep for $95(each additional metre is $70), how ever many you can fit into that space, we print, you cut...now that's a truly efficient way to buy poster prints.... for $16 more per meter you can have exterior pvc, ask us about canvas, transparencies, self adhesive (great for labels, stickers) waterproof, made for exterior use.

we supply snapper frames (the edges snap in and out to easily change a poster... great POS), floor graphics

We now have a line of high quality canvas where we can print up to 1350mm wide x 10 metres, that's a big print and very impressive, how would  1.3m x 2m look hanging on your wall?

 

 

 

* PRINTED FULL COLOUR ON MATT PAPER
ONLINE ORDERS ONLY TO ONLINE@DOCUPRINT.COM.AU
OR VIA OUR FILE UPLOAD SYSTEM.
 


Mounting & Laminating

Laminating

Hot Laminating, Cold Laminating, Thick or Thin up to 1.35m wide. Offers protection against water, finger marks etc. Most materials are suitable for a hot laminate process available in matt or gloss, whilst the cold laminate process is used primarily on inkjet prints. Finishes available in the cold laminate are matt, gloss and santex, a scratch resistant non gloss finish.

Mounting

 
We can mount onto:
· 3mm & 9mm MDF - a refined chip board.
· 5mm & 10mm Fome Board - a lightweight board which is often used in exhibitions etc. where it can be velcroed or taped to the wall.
· 5mm & 10mm Kapa Board - an upmarket fome board with an aluminium core which prevents warping.
· 5mm Coreflute
- useful and economical plastic for outdoor work
.


For a prices on mounting or laminating call 08 9335 2255 or send an email to sales@docuprint.com.au